Blog from the Best Roofer in St. Louis

Estimating the Cost of Your New Residential Roof

house with coin slotWhen installing a new residential roof in St. Louis, it can be challenging to estimate the cost. There are several factors to consider when updating your roofing material.

Size | Square Footage | Slope

The size, square footage, and slope of your roof are the primary determiners for replacement costs. The greater each of those numbers, the higher the estimate.

Waste & Materials

Be aware that your estimate will include a slight over-estimation of the total roof square footage to account for shingle overlap and cut-offs at the gables and flashings.

Roof Design & Shape

If you have a character home with an unusual roofline, you’re likely going to end up paying more.

Geographical Location

Roofing contractor costs vary from region to region, so get an idea of what is average for your location, and then choose a company based on reputation and skill.

Permits & Inspections

Some cities or towns require permits before work starts and an inspection when it ends; they will both come with fees.

Disposal Fees

All those old shingles have to go somewhere, and your contractor must dispose of them properly at a waste facility.


Most shingles and roofing materials come with standard warranties, but your contractor may suggest an extended warranty on the products.


If your new residential roof lacks the necessary ventilation, your roofer may suggest adding it to extend the life of your home.

TPO Vs. EPDM – The Better Option for Your New Commercial Roof

commercial roofing contractors Commercial roofing in St. Louis takes the brunt of widely varying temperature fluctuations. To ensure the roof maintains a tight seal against the elements, the type of roofing system used is a vital consideration. EPDM is a rubber membrane; TPO is similar but offers several benefits that EPDM does not.

Energy Efficiency

To improve energy efficiency, the reflective qualities of TPO work better than EPDM to maintain a consistent temperature in the building, no matter what your heating source.

Puncture Resistance

A puncture can often turn into a leak, and TPO offers greater puncture resistance than reinforced EPDM.

Installation Convenience

Flexibility often equals a more efficient installation. TPO can be installed in several ways, including being mechanically attached and adhered with the Rhinobond® System.

Dimensional Stability

Less movement of the material during temperature changes means TPO has better dimensional stability. EPDM is more likely to shrink, which can cause issues on your roof.

Seam Strength

No commercial roof is without seams, and being able to rely on their strength is critical. TPO seals can be welded, which creates a stronger bond than EPDM taped seams.

Ease of Repair

Because TPO is thermoplastic, the seams can be heat-sealed, and so can repairs. Your roofing contractor can just clean the material and heat-weld the repair.

Filing A Roof Replacement Insurance Claim – What You Should Know

roof damaged by falling tree Whether you have a hole in your roof, or a storm blew through and damaged it, your insurance policy may cover the repair or replacement. Navigating the paperwork and phone calls of filing insurance claims in St. Louis, MO, can seem daunting. Still, there are ways to simplify the process.

Find Out What Your Insurance Covers

The first step is to call your insurance company and find out what they cover. Some companies take into account the age of the roof and adjust their compensation accordingly. Often they’ll send out an inspector to verify the damage. Once you establish how much the insurance will pay, you can start researching your options for a contractor.

Navigating Your Claim

It’s best to find a residential roofing contractor that has experience with insurance claims. They will provide an estimate for the work and can help you navigate the claims process.

Take Photos

Keeping a record of before and after photos of your roof can help the insurance company verify the damage. Once the work is complete, take updated pictures so your records are current.

While damage to your roof can create a lot of headaches, your roofer and insurance company will work together to make sure you are covered.

Signs You Need New Gutters

guttersProper drainage is essential for the care of your home. When rainwater isn’t sufficiently diverted from your property, your home becomes prone to leaks, water damage, foundation damage, and other potentially costly problems. The best solution is to ensure that your gutters are in good condition and cleaned regularly. Here are some signs that your home may be due for gutter replacement in St. Louis, MO:

  1. Pools of Water, Mildew around Your Home’s Foundation – Your gutter system is designed to prevent water from pooling near the foundation. If you notice water or mildew, it may be due to a clog that you can simply clean. On the other hand, pooling may also be the result of structural damage to your gutter.
  2. Cracks in Your Gutter – Small cracks may seem like no big deal. However, over time, small cracks become larger ones and will contribute to the failure of your gutter system.

3.Paint Peeling on Your Gutter – Your gutter’s paint is intended to help weatherproof the system. When paint begins to peel, it       could be due to cracks or other damage that prevents the system from operating properly.

  1. Sagging, Loose Gutters – When your gutters begin to sag and pull away from the house, this is the most obvious sign that you need gutter replacement or repair right away.


Invest in Cool Roofing for Your Business

roofing contractorWhen it comes to energy efficiency, nothing beats a cool roofing system. These roofing products are ideal for businesses because they help to maintain comfortable indoor temperatures without putting a costly strain on HVAC units. As experienced commercial roofing contractors in St. Louis, MO, we understand what it takes to install cool roofing correctly. Shelby Roofing & Exteriors is here to answer your questions when you are thinking about installing new commercial roofing.

Cool roofs work by reflecting sunlight so that the building does not absorb excessive heat. Typically, these materials will be white or light-colored and have a high emittance rate, meaning that they do not trap and collect heat from the sun.

There’s no one material that constitutes a cool roof: business owners can choose slate tiles, terra cotta, solar photo-voltaic cells, rubber membranes, and others based on the style and construction of their building. That said, rubber membranes are among the most common commercial cool roofs.

With your cool roof, you can expect savings on your energy bill and a reliably comfortable, even indoor temperature. For more information about cool roofs, our commercial roofing contractors are available to take your call.

How Long Your New Residential Roof Will Last

residential roofLike all other building materials, roofing has a shelf life. The most common residential roofing is asphalt shingles. When asphalt shingles are properly installed, they can last for up to 25 years. So, how do you know when it’s time for a new residential roof in St. Louis, MO? The simple answer has to do with age. If your roof is over 15 years old, it may be a good candidate for replacement.

Of course, other factors go into this consideration as well. Lower quality shingles, improper installation, storm damage, and other variables may prematurely age your roof. When this happens, you may notice water damage, loose shingles, and other signs that you’re due for a new residential roof.

In any case, your best bet is to choose an experienced, licensed roofer who works with quality materials and knows how to do the job right. That way, you can rest assured that your roof is correctly installed for maximum longevity. At Shelby Roofing & Exteriors, we know what it takes to do the job right. You can depend on us to ensure that you get the maximum life from your new roof.

Common Causes of Damaged Siding in St. Louis, MO

contractor equipment next to house sidingSiding can transform a dull home into a delightful home. But damaged siding can have the opposite effect. Take a minute to learn about three common causes of damaged siding in St. Louis, MO.


You may be sharing your home with more creatures than you realize! Pests are a significant cause of property damage—especially if you have wood siding. Termites, woodpeckers, powder post beetles, carpenter bees, and more can transform your wood siding into their new home or next meal. However, it’s not just wood siding that can fall victim to pests; any siding systems that are supported with underlying wood are also at risk. To deter pests from damaging your property, spray insecticides or hot water on your siding using a nozzle.


One of the main purposes of siding is to keep moisture out of your home. So, if you notice that your siding is buckling or warping, it’s likely that excessive moisture is to blame. When moisture manages to seep into your exterior walls, it can cause damage to your siding, thereby resulting in even more moisture entering your property. It’s a vicious cycle. However, it can be remedied by proactive maintenance.

Wind & Hail

Siding is designed to be durable. But that doesn’t mean it’s indestructible. Severe hail storms or wind storms can smash debris into your siding, thereby creating dangerous cracks, dents, and holes.

Contact Shelby Roofing & Exteriors today for more advice about protecting your siding from damage.


What You Should Know About Residential Roofing Systems

rooferRoofs play an important role in both the look and function of your home. Therefore, you should do some research before selecting a type of residential roofing in St. Louis, MO.


The first (and perhaps most obvious) choice you have to make is the material you want. When considering all your options, be sure to think about the type, quality, longevity, and cost of the materials. By selecting high-quality materials from reputable manufacturers, your roof will be ready to battle the elements for up to 50 years. However, the opposite is also true: if you select subpar materials, you’ll likely be dealing with structural problems and leaks down the road.

Gutters & Vents

When thinking about roofs, most people simply think about the shingles. However, roofing systems are much more elaborate than that. It’s crucial to know about all the additional components of roofing systems, including gutters, vents, drains, and overhangs. These components can affect which roofing materials you can select for your property.

Roofing Contractors

It can seem overwhelming when you learn about all the different roofing options that are available to you. That’s why you need to find a roofing contractor who can walk you through every step of the process. At Shelby Roofing & Exteriors, we know everything there is to know about residential roofing, and we can’t wait to share our knowledge with you. Call today.

Is TPO Roofing Right For Your Business?

TPO roofingAs a commercial or industrial property owner, you understand the importance of your roof. It protects your workers, your assets, and your equipment from heat and extreme weather. That’s why it’s so important to choose the right roofing type to protect your facility. Take a minute to learn more about TPO commercial roofing in St. Louis. With this information, you can decide whether TPO roofing is right for your business.

What Is It?

Thermoplastic Polyolefin (TPO) is a type of single-ply roofing that has quickly gained popularity in the commercial roofing world. It consists of one layer of synthetic material reinforced by scrim. TPO is ideal for flat-roof applications.

Costs & Savings

Typically, TPO costs between $3.50 and $7.50 per square foot for an average commercial building with 20,000 square feet of roof space. This estimated price includes both materials and labor. Keep in mind that many factors can alter the price, including:

  • Roof Size
  • Roof Condition
  • Roof Access
  • Insulation Type
  • Membrane Type
  • Installation Method
  • Warranty Type

Many property owners discover that TPO helps them cut their energy costs. Due to its reflective white surface, TPO reflects the sun’s heat, thereby drastically reducing your summer cooling bills.


Another advantage of TPO roofing is its longevity. After the roofing materials have been installed, it can last up to three decades with proper maintenance. Contact Shelby Roofing & Exteriors for information about the long-lasting advantages of TPO roofing. Count on us to help you determine the best roofing solution for your operations.

Why Insulation Matters for a Healthy Roof

roof insulationA healthy roof means your home will protect you and your family through all seasons. From the heat of summer to the depths of winter, your attic insulation and roof help regulate the temperature in your home. If you’re unsure how much insulation you have, your general roofing contractor in St. Louis can inspect the space. They can also offer suggestions to improve your home’s energy efficiency.

Airflow & Insulation

Insulation and ventilation work hand in hand to ensure your home retains heat and keeps you cool. When moisture is allowed to build up inside, problems start to accumulate. They can include:

  • Ice Dams Preventing Water Runoff
  • Roofing Materials Failing Prematurely
  • Wet Wood
  • Rusting Metal Parts
  • Mold, Spores, Fungi, & Mildew
  • Interior Damage

Ample, balanced, and controlled airflow is the key to a sound roof and better interior environmental control. Once any of these is compromised, there is a risk of issues building up.

Be Prepared

When you protect your investment with an understanding of how these elements work together, you are better prepared to address problems. With the combined efforts of ventilation, insulation, and your general roofing contractor, your attic and roof system will stay healthy for years to come.